D-Link DES-3250TG Command Line Interface Reference Manual page 284

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
config access_profile
dscp <value 0-63> − Specifies that the access
profile will apply only to packets that have this
value in their Type-of-Service (DiffServ code
point, DSCP) field in their IP packet header.
icmp − Specifies that the switch will examine the
Internet Control Message Protocol (ICMP) field
within each packet.
type <value 0-65535> − Specifies that the
access profile will apply to this ICMP type value.
code <value 0-255> − Specifies that the access
profile will apply to this ICMP code.
igmp − Specifies that the switch will examine the
Internet Group Management Protocol (IGMP)
field within each packet.
type <value 0-255> − Specifies that the access
profile will apply to packets that have this IGMP
type value.
tcp − Specifies that the switch will exmamine the
Transmission Control Protocol (TCP) field within
each packet.
src_port <value 0-65535> − Specifies that the
access profile will apply only to packets that
have this TCP source port in their TCP header.
dst_port <value 0-65535> − Specifies that the
access profile will apply only to packets that
have this TCP destination port in their TCP
header.
udp − Specifies that the switch will examine the
Universal Datagram Protocol (UDP) field in
each packet.
src_port <value 0-65535> − Specifies that the
access profile will apply only to packets that
have this UDP source port in their header.
284