Cisco ONS 15454 Software Feature And Configuration Manual page 208

show ons alarm
show ons alarm
Use this command to display all the active alarms on the card.
Syntax Description
This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged EXEC
Usage Guidelines
This command may be used to help diagnose and isolate card problems.
Examples
Gateway# show ons alarm
Equipment
Active Alarms: None
Port Alarms
POS0
POS1
GigabitEthernet0
GigabitEthernet1
POS0
Active Alarms : None
Demoted Alarms: None
POS1
Interface not provisioned
Related Commands show controller pos
show ons alarm defects
show ons alarm failures
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
A-12
Active: TPTFAIL
Active: TPTFAIL
Active: None
Active: None
Appendix A Command Reference
78-15224-02