Figure 2-2 Displaying Ml-Series Pos Statistics; Table 2-3 Ml-Series Pos Statistics Fields And Buttons; Table 2-4 Pos Parameters - Cisco ONS 15454 Software Feature And Configuration Manual

Displaying ML-Series POS Statistics on CTC
Figure 2-2
Table 2-3
Button or Field Description
Baseline
Refresh
Auto-Refresh
Table 2-4
Parameter
Rx Pre Hdlc Bytes
Rx Post Hdlc Bytes
Rx Packets
Rx Normal Packets
Rx Shorts
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
2-4
Displaying ML-Series POS Statistics
ML-Series POS Statistics Fields and Buttons
Resets the software counters (in that particular CTC client only) temporarily to zero
without affecting the actual statistics on the card. From that point on, only the delta
in counters are displayed by this CTC. These new baselined counters are shown only
as long as the user displays the Performance window. If the user navigates to another
CTC window and comes back to the Performance window, the true actual statistics
retained by the card are shown.
Manually refreshes the statistics.
Sets a time interval for the automatic refresh of statistics.
POS Parameters
Meaning
Number of bytes received prior to the bytes undergoing HLDC
encapsulation by the policy engine
Number of bytes received after the bytes undergoing HLDC encapsulation
by the policy engine
Total number of packets received since the last counter reset
Number of packets between the minimum and maximum packet size
received
Number of packets below the minimum packet size received
Chapter 2 CTC Operations
78-15224-02