Ml-Series Access; Opening A Cisco Ios Session Using Ctc; Telnetting To The Node Ip Address And Slot Number; Figure 3-1 Ctc Ios Window - Cisco ONS 15454 Software Feature And Configuration Manual

ML-Series Access

Opening a Cisco IOS Session Using CTC

Users can initiate a Cisco IOS CLI session for the ML-Series card through CTC, the ONS 15454
SONET/SDH GUI. Click the IOS tab at the card-level CTC view, then click the Open IOS Command
Line Interface (CLI) button
command mode prompt appears.
An IOS startup configuration file must be loaded and the ML-Series card must be installed and initialized
Note
prior to opening a Cisco IOS CLI session on CTC. See the
page 3-6
Figure 3-1

Telnetting to the Node IP Address and Slot Number

Users can Telnet to the Cisco IOS CLI using the IP address and the slot number of the ONS 15454
SONET/SDH plus 2000.
An IOS startup configuration file must be loaded and the ML-Series card must be installed and initialized
Note
prior to Telnetting to the IP address and slot number plus 2000. See the
section on page 3-6
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
3-2
(Figure
for more information.
CTC IOS Window
for more information.
3-1). A window opens and a standard Cisco IOS CLI User EXEC
"Startup Configuration File" section on
Chapter 3 Initial Configuration
"Startup Configuration File"
78-15224-02