Cisco ONS 15454 Software Feature And Configuration Manual page 210

show ons alarm defect port
show ons alarm defect port
This commands displays the port layer defects.
Syntax Description
This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged EXEC
Usage Guidelines
This commands displays set of active defects for the link layer and the possible set of defects that can
be set. Note that the TPTFAIL defect can only occur on the POS ports and CARLOSS can only occur
on the ethernet ports.
Examples
router#show ons alarm defect port
Port Defects
POS0
Active: TPTFAIL
Reportable to TCC: CARLOSS TPTFAIL
POS1
Active: TPTFAIL
Reportable to TCC: CARLOSS TPTFAIL
GigabitEthernet0
Active: None
Reportable to TCC: CARLOSS TPTFAIL
GigabitEthernet1
Active: None
Reportable to TCC: CARLOSS TPTFAIL
Related Commands show interface
show ons alarm failures
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
A-14
Appendix A Command Reference
78-15224-02