Modifying Acl Tcam Size - Cisco ONS 15454 Software Feature And Configuration Manual

Chapter 15 Configuring Access Control Lists
Table 15-2 Applying ACL to Interface
Command
ip access-group {

Modifying ACL TCAM Size

You can change the TCAM size by entering the sdm access-list command. For more information on ACL
TCAM sizes, see the
To increase the ACL TCAM size, you must decrease another region's TCAM size, such as IP,
Note
IP multicast, or L2 switching.
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
access-list-number name
|
"Configuring Access Control List Size in TCAM" section on page
Purpose
Controls access to an interface.
} {in | out}
Modifying ACL TCAM Size
14-3.
15-5