Cisco ONS 15454 Software Feature And Configuration Manual page 212

show ons alarm failure eqpt
show ons alarm failure eqpt
This commands displays the equipment layer failures.
Syntax Description
This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged EXEC
Usage Guidelines
This commands displays set of active failures for the equipment layer. If an EQPT alarm is present the
Board Fail defect that was the source of the alarm will be displayed.
Examples
router#show ons alarm failure eqpt
Equipment
Active Alarms: None
Related Commands show ons alarm defect
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
A-16
Appendix A Command Reference
78-15224-02