Figure 2-1 Displaying Ml-Series Ethernet Statistics; Table 2-1 Ml-Series Ethernet Statistics Fields And Buttons; Table 2-2 Ethernet Parameters; Displaying Ml-Series Ethernet Statistics On Ctc - Cisco ONS 15454 Software Feature And Configuration Manual

Displaying ML-Series Ethernet Statistics on CTC

Figure 2-1
Table 2-1
Button or Field Description
Baseline
Refresh
Auto-Refresh
Table 2-2
Parameter
Rx Bytes
Rx Packets
Rx Unicast Packets
Rx Multicast Packets
Rx Broadcast Packets
Rx Giants
Rx Total Errors
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
2-2
Displaying ML-Series Ethernet Statistics
ML-Series Ethernet Statistics Fields and Buttons
Resets the software counters (in that particular CTC client only) temporarily to zero
without affecting the actual statistics on the card. From that point on, only the delta
in counters are displayed by this CTC. These new baselined counters are shown only
as long as the user displays the Performance window. If the user navigates to another
CTC window and comes back to the Performance window, the true actual statistics
retained by the card are shown.
Queries the current values from the card and updates the CTC display.
Sets a time interval for the automatic refresh of statistics.
Ethernet Parameters
Meaning
Number of bytes received since the last counter reset
Number of packets received since the last counter reset
Number of unicast packets received
Number of multicast packets received
Number of broadcast packets received
Number of packets received that are greater than 1530 bytes in length
Total number of receive errors
Chapter 2 CTC Operations
78-15224-02