Monitoring And Maintaining Eigrp; Table 10-5 Ip Eigrp Clear And Show Commands - Cisco ONS 15454 Software Feature And Configuration Manual

Chapter 10 Configuring Networking Protocols

Monitoring and Maintaining EIGRP

You can delete neighbors from the neighbor table. You can also display various EIGRP routing statistics.
Table 10-5
explanations of fields in the resulting display, refer to the Cisco IOS IP and IP Routing Command
Reference publication.

Table 10-5 IP EIGRP Clear and Show Commands

Command
Router# clear ip eigrp neighbors
{ip-address | interface }
Router# show ip eigrp interface
[ interface ] [ as-numbe r]
Router# show ip eigrp neighbors
[ type-number ]
Router# show ip eigrp topology
{ autonomous-system-number ] |
[[ ip-address ] mask }
Router# show ip eigrp traffic
[ autonomous-system-number ]
This is an example of output from the show ip eigrp interface privileged EXEC command:
Router# show ip eigrp interface
IP-EIGRP interfaces for process 1
Interface
PO0
Fa0
This is an example of output from the show ip eigrp neighbors privileged EXEC command:
Router# show ip eigrp neighbors
IP-EIGRP neighbors for process 1
H
0
This is an example of output from the show ip eigrp topology privileged EXEC command:
Router# show ip eigrp topology
IP-EIGRP Topology Table for AS(1)/ID(192.168.3.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
P 192.168.1.0/24, 1 successors, FD is 30720
P 192.168.2.0/24, 1 successors, FD is 10752
P 192.168.3.0/24, 1 successors, FD is 28160
This is an example of output from the show ip eigrp traffic privileged EXEC command:
Router# show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
lists the privileged EXEC commands for deleting neighbors and displaying statistics. For
Xmit Queue
Peers Un/Reliable
1 0/0
0 0/0
Address
192.168.2.1
r - reply Status, s - sia Status
via 192.168.2.1 (30720/28160), POS0
via Connected, POS0
via Connected, FastEthernet0
Purpose
Deletes neighbors from the neighbor table.
Displays information about interfaces configured for
EIGRP.
Displays EIGRP discovered neighbors.
Displays the EIGRP topology table for a given process.
Displays the number of packets sent and received for all
or a specified EIGRP process.
Mean Pacing Time
SRTT Un/Reliable
20 0/10
0 0/10
Interface Hold Uptime
(sec)
PO0 13 00:08:15
Configuring IP Routing
Multicast Pending
Flow Timer Routes
50 0
0 0
SRTT RTO Q Seq Type
(ms) Cnt Num
20 200 0 2
10-27