Appendix B - Reference Information; Error Codes; Data Logger Error Codes; File System Error Codes - Banner SureCross DX80 Gateway Pro Reference Manual

SureCross™ DX80 Web Configurator
Instruction Manual
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164

Appendix B - Reference Information

Error Codes

Data Logger Error Codes

The following Status messages may appear for an event or data log file.
Status Message
OK
Error: -n A file system error has occurred. Refer to the file system error
codes listed below.
Too much information per record is being logged. As this time,
Record size overflow
the record size is a maximum of 1000 characters.
Illegal file name File names must use alphanumeric characters only and may
have no embedded spaces. The suffix must be .txt for event
and data log files.
E-mail error: -n There is a problem attempting to e-mail a log file. The error
codes are listed below.
Unknown x/y A status x with code y has not been enumerated for the web
page. Please contact Banner technical support and provide the
values of x and y.

File System Error Codes

The file system errors are listed in the following table.
One commonly occurring code is -5, referring to a full volume (a "disk full" error if it was a disk).
Duplicate or not found errors are also common error messages. A DIR_ENTRY error refers to an
invalid file name.
Error Code
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
-15
-16
-17
Error Codes
Definition
Description
NAFS_SUCCESS
NAFS_INVALID_VOLUME_NAME
NAFS_INVALID_BLOCK_NUMBER
NAFS_SERVICES_NOT_READY
NAFS_BLOCK_NOT_MAPPED
NAFS_NO_FREE_BLOCKS
NAFS_WRITE_FAILED
NAFS_INVALID_BLOCK
NAFS_DELETE_FAILED
NAFS_NULL_POINTER
NAFS_INVALID_RAM_VOLUME
NAFS_INVALID_FLASH_VOLUME
NAFS_UNKNOWN_FLASH
NAFS_MALLOC_FAILED
NAFS_ALREADY_INITIALIZED
NAFS_INVALID_WRITE_OPTION
NAFS_BLOCK_SCAN_FAILED
NAFS_NO_TRANSFER_SECTOR
8
P/N 134421