Configure Points - Banner SureCross DX80 Gateway Pro Reference Manual

SureCross™ DX80 Web Configurator
Instruction Manual
Tip
If you leave any Web Configurator
screen without clicking the Change
button to submit the changes to the
Ethernet Bridge or Gateway Pro, all
changes are lost.
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164

Configure Points

After setting up the basic model for each device, configure the I/O points. There are two ways
to access the I/O points configuration screen: 1) use the Configure Points tab; or 2) click on the
hyperlinked device number in the left column of the Select Models table to access the Expanded
Configure Points page (see the Expanded Configure Points section).
Refer to the device's data sheet for factory default information.
Setting Up I/O Points
To set up an I/O point:
Select the I/O Enabled checkbox. Any active I/O point must be enabled or the I/O is
1.
ignored.
2. Select an I/O type from the I/O Selection drop-down list. The Configure Points sample
screen shows a Gateway defined with four discrete IN, four discrete OUT, two analog IN,
and two analog OUT points. Always refer to the device data sheet to determine which
discrete and which analog I/O points are active for a given device. Note, however, that
the NPN and PNP settings for discrete I/O shown on the data sheet are only default
configuration settings and can be changed.
Define any applicable parameters, e.g. sample interval, report interval, hysteresis,
3.
threshold, or any other parameter displaying on the main or expanded view screens.
After setting up all I/O points using either the Configure Points tab or the expanded
4.
Configure Points screen, click the Change button to submit the changes to the Ethernet
Bridge or Gateway Pro.
To send all I/O data to the devices, use the Select Models screen by selecting the Send
5.
ALL checkbox and clicking the Update button. To send the individual I/O point changes,
use the expanded Configure Points screen and the Send button.
RF Devices Tab
1
P/N 134421