On Demand - Banner SureCross DX80 Gateway Pro Reference Manual

SureCross™ DX80 Web Configurator
Instruction Manual
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164

On Demand

Use the On Demand tab to set up scheduled events that occur only once instead of daily.
The starting time and date (ON Time/Date) determine when the ON Value is applied to the given
register. The ending time and date (OFF Time/Date) determine when the ON period ends. The OFF
Value is applied at the end of the ON Time.
After an On Demand event has passed, it should be removed from the list. The expired event
remains included in the list until it is deleted, serving as a record of a past event.
To reference the astronomical clock instead of fixed time of day, enter DAWN or DUSK in place of
the HH:MM:SS on and off times. An offset in minutes may be included. To specify one half hour
after sunrise, enter dawn+30. To specify one half hour before sunset, enter dusk-30, etc. Upper
and lower case is ignored, but do not include any spaces in the dawn/dusk string. The astronomical
clock will not work unless latitude, longitude, and time zone are set in the System > Setup > Time
and Date tab.
Other Commands
Delete button: Removes the rule listed in the Showing box.
Insert button: Inserts a new rule number in front of the rule listed in the Showing box. It is not
necessary to use the Insert button to add events to the bottom of the list or to define any events
with zero for the time and date. To add a rule at the bottom of the list, increase the number of
commands/rules enabled.
Prev and Next buttons: Displays the next page of On Demand events.
Update button: Sends new data or settings to the Ethernet Bridge or Gateway Pro.
Advanced Tab
9
P/N 134421