Dx80 Is Modbus Rtu Slave - Banner SureCross DX80 Gateway Pro Reference Manual
Wireless i/o network system web configurator
Hide thumbs
Also See for SureCross DX80 Gateway Pro:
- Network manual (110 pages) ,
- Product manual (109 pages) ,
- Quick start manual (25 pages)
Table of Contents
Advertisement
SureCross™ DX80 Web Configurator
Instruction Manual
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
DX80 is Modbus RTU Slave
The third option, DX80 is Modbus RTU Slave, sets up a Gateway and Ethernet Bridge or Gateway
Pro as a slave device. This selection stops the communication between the Ethernet interface and
the DX80 Gateway.
DX80 is Modbus RTU Slave mode was created for special configurations of Gateway Pro or
Ethernet Bridge devices. Contact Banner Wireless Support for more information.
RF Devices Tab
2
P/N 134421
Advertisement
Table of Contents
Troubleshooting
