2.4 GHz
900 MHz
Model
DX80P9T6S
DX80P9T6W
DX80P2T6S
DX80P2T6W
DX80P9A6S
DX80P9A6W
DX80P2A6S
DX80P2A6W
WARNING . . . Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death.
These products do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A failure or
malfunction can cause either an energized or de-energized output condition. Consult your current Banner Safety Products catalog for safety
products that meet OSHA, ANSI, and IEC standards for personnel protection.
Printed in USA
SureCross™ DX80 GatewayPro
GatewayPro models for protocol conversion or web-based configuration
The SureCross™ DX80 is a radio frequency network system built around a Gateway and one
or more Nodes.
•
+10 to 30V dc power input
•
Modbus serial interface and Ethernet interface
•
Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple
Access (TDMA) control architecture combine to ensure reliable data delivery within the
unlicensed Industrial, Scientific, and Medical (ISM) bands
•
Transceivers provide two-way communication between the Gateway and Node, including
fully acknowledged data transmission
•
Site Survey analyzes the network's signal strength and reliability
•
External or internal antenna
For additional information and a complete list of accessories, including FCC approved
antennas, refer to Banner Engineering's website, www.bannerengineering.com/surecross.
Power
Modbus/TCP or EtherNet/IP
communication protocol
+10 to 30V dc
Modbus/TCP protocol,
Configuration capability using the
Models
Feature
Web Configurator
12/09
Features
Frequency
900 MHz ISM Band
2.4 GHz ISM Band
900 MHz ISM Band
2.4 GHz ISM Band
Antenna
External
Internal
External
Internal
External
Internal
External
Internal
P/N 131933 rev. E