DFI RM641-HD User Manual page 42

Parallel Port Configuration
Sets the parameters
of the parallel port (LPT/LPTE).
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Change Settings [Auto]
Device Mode [STD Printer Mode]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Parallel Port
Enables or disables the
parallel port (LPT/LPTE).
Change Settings
Selects an optimal setting for the super IO device.
Device Mode
Changes the mode of the printer port.
Chapter 6 BIOS Setup
Chapter 6
PC Health Status
This section displays the hardware health monitor.
Enable or Disable Parellel
Port (LPT/LPTE)
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
42
42
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
PC Health Status
Smart Fan Function

Case Open
[Disabled]
CPU Temperature : +35.0 C
System Temperature
: +28.5 C
CPU Fan Speed
: 7377 RPM
System Fan Speed : N/A
VCore : +1.728 V
+5V : +5.038 V
+12V
: +11.968 V
+1.5V : +1.520 V
+3.3V : +3.344 V
3VSB : +3.376 V
VBAT
: +3.056 V
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Smart Fan Function
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Smart Fan Function
CPU Smart Fan Control [Enabled]
60
Boundary 4
50
Boundary 3
40
Boundary 2
Boundary 1 30
100
Speed Count 5
75
Speed Count 4
50
Speed Count 3
Speed Count 2 40
Speed Count 1 30
[Enabled]
System Smart Fan Control
Boundary 4 60
Boundary 3 50
40
Boundary 2
30
Boundary 1
100
Speed Count 5
Speed Count 4 75
50
Speed Count 3
40
Speed Count 2
30
Speed Count 1
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Smart Fan Function
Setting
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
Enable CPU Smart Fan
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi.com