Table of Contents
Advertisement
Chapter 3
3. Connect the SATA data cable and the SATA power cable to the connectors on the SATA drive.
4. Secure the HDD bracket back to the system.
Mounting screw
SATA 3.0 port
Mounting screw
Note:
The system can accommodate 4 disks (3.5" or 2.5"). However, 3.5" to 5.25" or 2.5" to
5.25" drive mounting bracket adapters will be required to install HDDs in the optical bays.
SATA power and
data connector
12
Chapter 3 Installing the Device
www.dfi.com
Advertisement
Table of Contents
