DFI RM641-HD User Manual page 54

USB Ports Per-Port Disable Control
This field is used to control each of the USB ports(0~13) disabling. When enabled,
it will display the following information:
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
USB Configuration
USB Precondition [Disabled]
XHCI Mode [Auto]
USB Ports Per-Port Disable Control [Enabled]
USB Port #0 [Enabled]
USB Port #1 [Enabled]
[Enabled]
USB Port #2
USB Port #3 [Enabled]
USB Port #4 [Enabled]
USB Port #5 [Enabled]
USB Port #8 [Enabled]
USB Port #9 [Enabled]
USB Port #10 [Enabled]
USB Port #11 [Enabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
USB Port #0/1/2/3/4/5/8/9/10/11
Enables or disables these USB ports.
Chapter 6 BIOS Setup
Chapter 6
Control each of the USB
ports (0~13) disabling.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
54
54
PCH Azalia Configuration
This field is used to configure the PCH Azalia settings.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset
PCH Azalia Configuration
Azalia [Auto]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Control detection of the
Azalia device.
Disable= Azalia will be
unconditionally disabled
Enabled= Azalia will be
unconditionally enabled
Auto=Azalia will be ena-
bled if present, disabled
otherwise.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
www.dfi.com