Table of Contents
Advertisement
Intel(R) Ethernet Network Connection i217-LM - 00:01:29:...
This section is used to configure the parameters of the Gigabit Ethernet device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
PORT CONFIGURATION MENU
NIC Configuration
Blink LEDs (range 0-15 seconds)
0
PORT CONFIGURATION INFORMATION
UEFI Driver:
Intel(R) 1GbE DEV 5.1.00
Adapter PBA:
FFFFFF-OFF
Chip Type:
Intel PCH LPT
PCI Device ID
153A
PCI Bus: Device: Function:
0:25:0
Link Status
[Disconnected]
Factory MAC Address:
00:01:29:12:34:56
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
NIC Configuration
This field is used to configure the network device.
Blink LEDs
Blink LEDs for the specified duration (up to 15 seconds).
Link Status
This field indicates the link status of the network device.
Chapter 6 BIOS Setup
Chapter 6
Click to configure the
network device port.
Select Screen
→ ←:
Select Item
↑↓:
Enter:
Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save and Reset
ESC:
Exit
46
46
NIC Configuration
This field is used to configure the network device.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Link Speed
[AutoNeg]
Wake on LAN
[Enabled]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Link Speed
Selects the link speed and duplex for the current network port.
Wake on LAN
Enables this option to wake the system with a magic packet.
Change link speed and
duplex for current port.
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save Changes and
Reset
ESC: Exit
www.dfi.com
Advertisement
Table of Contents
