DFI RM641-HD User Manual page 43

CPU Smart Fan Control
When this feature is set to Automatic, the CPU's fan speed will rotate according to the
CPU's temperature. The higher the temperature, the faster the speed of rotation.
System Smart Fan Control
When this feature is set to Automatic, the System's fan speed will rotate according to
the System's temperature. The higher the temperature, the faster the speed of rota-
tion.
Boundary 1 to Boundary 4
The range is 0-127.
Speed Count 1 to Speed Count 5
The range is 1-100%.
Case Open
Sets this field to Enabled to allow the system to alert you of a chassis intrusion event.
Chapter 6 BIOS Setup
Chapter 6
Second Super IO Configuration
This section is used to configure the parameters of the system second super I/O chip.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Second Super IO Configuration
Second Super IO Chip
Serial Port 6 Configuration

Serial Port 7 Configuration

Serial Port 8 Configuration

Serial Port 9 Configuration

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Serial Port 6 Configuration to Serial Port 9 Configuration
Sets the parameters
of serial port 6 to serial port 9.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Serial Port 6 Configuration
Serial Port
Device Settings
Change Settings
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
43
43
Set Parameters of Serial
Port 6.
NCT5104D
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Enable or Disable Serial
Port (COM)
[Enabled]
IO=240h; IRQ=5;
[Auto]
Select Screen
→ ←:
Select Item
↑↓:
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save and Reset
ESC: Exit
www.dfi.com