Table of Contents
Advertisement
Audio
Rear Audio
Line-in/Surround
Line-out
Mic-in/
Center+Subwoofer
Front
Audio
2
10
1
9
Rear Audio
The system board is equipped with 3 audio jacks. A jack is a one-hole connecting interface for
inserting a plug.
•
Line-in/Surround Jack (Light Blue)
This jack is used to connect any audio devices such as Hi-fi set, CD player, tape player,
AM/FM radio tuner, synthesizer, etc.
• Line-out Jack (Lime)
This jack is used to connect a headphone or external speakers.
•
Mic-in/Center+Subwoofer Jack (Pink)
This jack is used to connect an external microphone.
Front Audio
The front audio connector allows you to connect to the second line-out and mic-in jacks that
are at the front panel of your system.
Driver Installation
Install the audio driver. Refer to the chapter 8 for more information.
Chapter 5 Ports and Connectors
Chapter 5
I/O Connectors
SATA (Serial ATA) Connectors
Features
•
4 Serial ATA ports
- 2 SATA 3.0 ports with data transfer rate up to 6Gb/s (SATA 0 and SATA 1)
- 2 SATA 2.0 ports with data transfer rate up to 3Gb/s (SATA 4 and SATA 5)
•
Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA data cable to a SATA connector and the other end to your Serial ATA device.
26
7
1
SATA 3.0 6Gb/s
(SATA port 1 provides adequate
space for SATA DOM.)
SATA 0
SATA 1
SATA 5
SATA 4
SATA 2.0 3Gb/s
www.dfi.com
Advertisement
Table of Contents
