Batco 2035 Assembly Manual page 99

PORTABLE GRAIN BELT CONVEYOR – STANDARD
Table 38 Scissor Arm Components (continued)
Item Description
4
1" x 7–1/2" Lower Scissor Attach Pin
5
1" Flat Washer (Plated)
Figure 66. Installing the Scissor Arms
Install the Bowtie
1. Slide the bowtie (5) over the ends of the scissor arms (4).
2. Fasten the bowtie to the scissor arms with 5/8" x 2" hex bolts (6) and 5/8" locknuts (7).
3. Fasten the bowtie cross brace (1) to the scissor arms with 1/2" x 1–1/2" hex bolts (3) and 1/2" locknuts (2).
Note
A steel punch may be required to align the bolt holes.
Table 39. Bowtie and Bowtie Cross Brace Components
Item
Description
1 Bowtie Cross Brace
2
1/2" Nylock Nut
P1512021 R6
2
1
4
3
5
4. ASSEMBLY
99