Table of Contents
Advertisement
PORTABLE GRAIN BELT CONVEYOR – STANDARD
Figure 79. Assembling the Swing Gearbox Side Mount
4
4
2
2
2
2
7
7
Install the Swing Gearbox onto the S-Drive
1. Fill the 6190 gearbox (11) with 80W-90 gear lube until oil flows out the side of the indicator port.
2. Remove the locking collar/bearing (2), and 1/2" locknuts (1) from the drive roller shaft of the s-drive.
3. Slide the gearbox side mount (3) over the drive shaft of the s-drive.
4. Re-attach the locking collar, bearing, and 1/2" locknuts onto the s-drive.
5. Attach the gearbox mount bracket (12) to the gearbox side mount (3) with 1/2" x 1–1/2" bolts (4), 1/2" flat
washers (6), and 1/2" locknuts (1).
6. Secure the gearbox mount bracket (12) to the s-drive with 1/2" x 1–1/2" bolts (4), 1/2" lock washers (5), and
1/2" flat washers (6).
7. Install the 3/8" x 5-1/4" key (7) into the drive roller shaft of the s-drive and secure it with a 1/2" x 1" bolt
(8), 1/2" lock washer (5), and key retainer (9).
8. Slide the 6190 gearbox (11) over the drive roller shaft of the s-drive.
Note
Ensure the drive roller turns clockwise.
9. Attach the 6190 gearbox to the gearbox side mount with 1/2" x 1–1/2" hex bolts (4), 1/2" lock washers (5),
and 1/2" flat washers (6).
10. Install the breather (10) and gearbox plug (13) into the 6190 gearbox.
P1512021 R6
1
1
5
5
4. ASSEMBLY
3
3
2
2
6
6
2
2
1
1
115
Hide quick links:
Advertisement
Table of Contents
