Batco 2035 Assembly Manual page 118

4. ASSEMBLY
Install the PTO and Drive Shafts
1. Connect the drive shaft (4) and the 3/8" x 2" keys (3) to the 6190 gearbox (1) and 5190 gearbox (5) with
3/8" x 2" keys (3) and 3/8" x 3" spring pins (2).
2. When applicable, drill the pin hole in the PTO shaft to 3/8".
3. Connect the PTO shaft (7) to the 5190 gearbox (6) with a 3/8" x 2" key (3) and a 3/8" x 3" spring pin (2)
Table 51. PTO and Drive Shaft Components
Item
Description
1
6190 Gearbox 1.85:1, 1–15/16
2
3/8" x 3" Pin Spring
3
3/8" x 2" Key
4
Drive Shaft
5
5190 Gearbox 1:1 CW/CW, 1–1/2
6
5190 Gearbox 1:1 CW/CW, 1–1/2
7
PTO Shaft
Figure 81. Installing the PTO and Drive Shafts
1
2
3
4
4
3
2
5
Install the Guards, Hitch Tongue, and PTO Cradle
1. Attach the guards (2,3) to the 5190 gearboxes with 1/2" x 1-1/2" bolts (5) and 1/2" lock washers (4).
2. Insert the PTO cradle (6) into its welded channel on the hitch.
3. Attach the hitch tongue assembly (7) to the hitch using a 3/4" x 3–1/2" hitch pin (9) and a 3/16" x 3-1/4"
hairpin (8).
118
PORTABLE GRAIN BELT CONVEYOR – STANDARD
6
2
3
7
P1512021 R6