Batco 2035 Assembly Manual page 97

PORTABLE GRAIN BELT CONVEYOR – STANDARD
Figure 64. General Components of the Scissor Frame
1
2
3
Install the Axle Arms onto the Axle
Shifting components while assembling.
Chock the wheels before beginning work. Failure to chock the wheels can result in injury and
equipment damage.
1. Position the end of the axle arm (3) into the bracket welded to the axle (1).
2. Fasten the axle arm to the axle with 3/4" x 2" hex bolts (2) and 3/4" locknuts (4).
3. Loosely fasten the cross brace (7) to the axle arms using 1/2" x 1–3/4" hex bolts (6) and 1/2" locknuts (5).
Note
The crossbrace will be tightened as the tube is attached to the frame.
Table 37. Axle Arm Components
Item Description
1
Axle
2
3/4" x 2" Hex Bolt (Plated, GR8)
3
Axle Arm
4
3/4" Nylock Nut
P1512021 R6
4
5
6
6
4. ASSEMBLY
97