Batco 2035 Assembly Manual page 25

PORTABLE GRAIN BELT CONVEYOR – STANDARD
Table 1 Safety Decals (continued)
Part Number Description
P1513039
For proper raising and lowering of equipment:
For proper raising and lowering of equipment:
• After lowering equipment, always tighten brake lock
• After lowering equipment, always tighten brake lock
by turning winch handle clockwise at least two clicks.
by turning winch handle clockwise at least two clicks.
• Rotate winch handle until cable has light tension,
• Rotate winch handle until cable has light tension,
when in towing position.
when in towing position.
• Do not lubricate winch brake discs.
• Do not lubricate winch brake discs.
• Inspect lift cable periodically; replace if damaged.
• Inspect lift cable periodically; replace if damaged.
• Inspect cable clamps periodically; tighten if necessary.
• Inspect cable clamps periodically; tighten if
necessary.
Country of Origin
P1513022
To prevent belt damage, use correct belt tension and do
To prevent belt damage, use correct belt tension and do not attempt to
not attempt to adjust belt tracking with the take-up roller.
adjust belt tracking with the take-up roller.
To set correct belt tension:
To set correct belt tension:
• While conveyor is running empty, fully tighten nut against the
• While conveyor is running empty, fully tighten nut against the pretensioner
pretensioner (take-up pipe) so that spring is not visible.
(take-up pipe) so that spring is not visible.
• Ensure take-up roller is tensioned equally by using a tape to
• Ensure take-up roller is tensioned equally by using a tape to measure distance
measure distance "X".
• After the conveyor belt has been tensioned, check the alignment • After the conveyor belt has been tensioned, check the alignment of all other
s-drive rollers and periodically afterward.
of all other s-drive rollers and periodically afterward.
See manual for complete instructions.
See manual for complete instructions.
Country of Origin
P1512021 R6
CAUTION
CAUTION
NOTICE
NOTICE
TAKE-UP ROLLER TAKE-UP ROLLER
Part Number
NUT NUT
X
PRETENSIONER PRETENSIONER
X
"
X
Part Number
2. SAFETY
25