Batco 2035 Assembly Manual page 90

4. ASSEMBLY
6. Run the cable from the bottom slider pulley towards the hopper and stop at the cable attach.
7. Loop the cable under and around the cable attach and secure it with two 5/16" cable clamps (2).
8. Trim excess cable.
9. Test the function of the winch by lifting the conveyor to its raised position.
Crushing/impact hazard
Do not stand under the conveyor while testing the winch. The conveyor may drop
unexpectedly. Ensure all equipment and personnel are clear of the conveyor while testing
the winch.
The tube lift components may become damaged.
Stop the test if anything should slide, slip, or jam. Correct the issue before continuing.
Table 34. Tube Lift Cable Components
Item
Description
1
5/16" Cable
2
5/16" Cable Clamp
3
Cable Attach Pulley
4
Top Slider Pulley
5
Bottom Slider Pulley
90
PORTABLE GRAIN BELT CONVEYOR – STANDARD
P1512021 R6