Batco 2035 Assembly Manual page 102

4. ASSEMBLY
2. Position the hydraulic cylinders (1) with the rod end towards the bowtie.
3. Secure the rods with clevis pins (2) and hairpin clips (3).
Table 41. Hydraulic Cylinder Components
Item
Description
1
4–1/2" x 40" Hydraulic Cylinder
2
Clevis Pin
3
Hairpin Clip
Figure 69. Installing the Hydraulic Cylinders
Attach the Tube to the Frame
1. Apply grease to the four tube frame pins (2).
2. Lower the tube into position on the frame taking care to center it.
3. At the connection closest to the hopper, fasten the stiffener brackets (4) to the frame and tube with 1" x 5"
hex bolts (1), tube frame pins (2), and 1" locknuts (3).
4. Fasten the frame stiffener braces (5, 6) to the frame and stiffener bracket with 5/8" x 2" hex bolts (8), a 5/8"
x 2–1/2" hex bolt (9), and 5/8" locknuts (10).
5. Tighten the bolts on the cross brace (7).
102
PORTABLE GRAIN BELT CONVEYOR – STANDARD
1
3
2
P1512021 R6