Batco 2035 Assembly Manual page 100

4. ASSEMBLY
Table 39 Bowtie and Bowtie Cross Brace Components (continued)
Item Description
3
1/2" x 1–1/2" Hex Bolt (GR8)
4 Scissor Arm
5 Bowtie
6
5/8" x 2" Hex Bolt (GR8)
7
5/8" Nylock Nut
Figure 67. Installing the Bowtie
2
1
Install the Lift Ladder and Transport Brace
1. Position the lift ladder (4) onto the bowtie (8).
2. Slide the scissor pins (6) into the holes on the lift ladder and through the channel on the bowtie.
Note
Grease the scissor pin before inserting it into the bowtie.
3. Secure the scissor pins in place with 7/16" x 1–1/2" hex bolts (5) and 7/16" (7) locknuts.
4. Loosely fasten the transport brace (2) to the lift ladder with 1/2" x 1–3/4" hex bolts (3) and 1/2" locknuts
(1).
100
1
3
3
PORTABLE GRAIN BELT CONVEYOR – STANDARD
2
7
6
4
5
P1512021 R6