Install The Shaft Guard - Batco 2035 Assembly Manual

PORTABLE GRAIN BELT CONVEYOR – STANDARD

4.32. Install the Shaft Guard

For component identification and placement refer to:
• Figure 88 on page 133
1. Mount the shaft guard (2) over the roller shaft and onto the flange bearing carriage bolts.
2. Secure the shaft guard in place using two locknuts (3).
Note
When mounting onto a 15/16" bearing (FL210), use 5/8" locknuts.
When mounting onto a 1-1/4" bearing (FL206) or 1-1/2" bearing (FL208), use ½" locknuts.
Figure 88. Installing Shaft Guard
P1512021 R6
4. ASSEMBLY
133