11.2.6 Adjusting the touch panel position (Touch panel calibration)
Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the object position
may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position with this
function.
Before adjustment
Run
The [Run] will operate though you
intended to touch the [Stop] button.
Display operation of Touch panel calibration
Main menu
(
9.3 Utility Display)
Touch
[GOT setup]
Stop
GOT setup
Touch
[Operation]
Touch panel calibration
11. DISPLAY AND OPERATION SETTINGS (GOT SET UP)
11.2 Operation Setting (Settings Regarding Operation)
After adjustment
Run
Stop
The [Stop] button can be touched
without fail.
Operation
Touch
[Touch panel
calibration]
11 - 13
9
10
11
12
13
14
15
16