Displaying The Tftp Client; Tftp Client Configuration Example - HP A5830 Series Configuration Manual

Task...
2. Use an ACL to control the
device's access to TFTP
servers.
3. Specify
address
packets.
4. Return to user view.
5. Download or upload a file
in an IPv4 network.
6. Download or upload a file
in an IPv6 network.

Displaying the TFTP client

Task...
Display the source IP address
configuration of the TFTP client.

TFTP client configuration example

Network requirements
As shown in
•
of the master is 1 and that of the subordinate device is 2.
The PC serves as a TFTP server and the IRF fabric as a TFTP client. Their IP addresses are 1.2.1.1/16
•
and 1.1.1.1/16 respectively. The device and PC can reach each other.
The IRF fabric downloads a system software image file from the PC for upgrading and uploads a
•
configuration file named config.cfg to the PC for backup.
Command...
tftp-server [ ipv6 ] acl acl-number
the source IP
tftp client source { interface interface-type
of sent TFTP
interface-number | ip source-ip-address }
quit
tftp server-address { get | put | sget }
source-filename [ destination-filename ]
[ source { interface interface-type interface-
number | ip source-ip-address } ]
tftp ipv6 tftp-ipv6-server [ -i interface-type
interface-number ] { get | put } source-
filename [ destination-filename ]
Command...
display tftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
Figure 31, an IRF fabric consists of a master and a subordinate device. The member ID
Remarks
Available in any view.
84
Remarks
Optional.
By default, no ACL is used to
control the device's access to
TFTP servers.
Optional.
By default, the source IP
address is determined by the
route from the TFTP client to
the TFTP server.
—
Optional.
Available in user view.
Optional.
Available in user view.