HP A5830 Series Configuration Manual page 48

Task...
10. Set the local password.
11. Specify the command level of the local
user.
12. Specify the service type for the local
user.
13. Exit to system view.
14. Configure common settings for VTY
user interfaces.
After enabling command authorization or command accounting, perform the following configuration to
make the function take effect:
Create a HWTACACS scheme, and specify the IP address of the authorization server and other
•
authorization parameters.
Reference the created HWTACACS scheme in the ISP domain.
•
For more information, see Security Configuration Guide.
When users adopt the scheme mode to log in to the device, the level of the commands they can access
depends on the user privilege level defined in the AAA scheme.
When the AAA scheme is local, the user privilege level is defined by the authorization-attribute
•
level level command.
When the AAA scheme is RADIUS or HWTACACS, the user privilege level is configured on the
•
RADIUS or HWTACACS server.
For more information about AAA, RADIUS, and HWTACACS, see Security Configuration Guide.
When logging in to the device through Telnet again:
Enter the login username and password. A prompt such as <HP> appears after you enter the correct
•
username (for example, admin) and password and press Enter, as shown in
After you enter the correct username and password, if the device prompts you to enter another
•
password of the specified type, you are authenticated for the second time. To pass authentication,
you must enter a correct password as prompted.
If "
•
All user interfaces are used, please try later!
exceed the maximum number.
Command...
password { cipher | simple }
password
authorization-attribute level
level
service-type telnet
Quit
—
" is displayed, the current login users
41
Remarks
Required.
By default, no local password
is set.
Optional.
By default, the command level
is 0.
Required.
By default, no service type is
specified.
—
Optional.
See "Configuring common
settings for VTY user interfaces
(optional)."
Figure 14.