Configuring None Authentication For Console Login - HP A5830 Series Configuration Manual

Authentication
mode
Scheme

Configuring none authentication for console login

Configuration prerequisites
Log in to the device.
By default, log in to the device through the console port without authentication, having user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
Configuration procedure
Task...
1. Enter system view.
2. Enter AUX user interface view.
3. Specify
authentication mode.
4. Configure common settings
for console login.
Configuration
Set the local password.
Configure the authentication scheme.
Remote AAA
authentication
Select an
authentication
scheme.
Local
authentication
requirements."
Command...
system-view
user-interface aux first-number
[ last-number ]
the none
authentication-mode none
—
Configure a
RADIUS/HWTACA
CS scheme.
Configure the AAA
scheme used by the
domain.
Configure the
username and
password on the
AAA server.
Configure the
authentication
username and
password.
Configure the AAA
scheme used by the
domain as local.
Remarks
—
—
Required.
By default, log in to the device through
the console port without authentication,
and have user privilege level 3 after
login.
Optional.
See
settings for console
27
Remarks
authentication for console
For more information, see
"Configuring scheme authentication
for console login."
"Configuring optional common
login."
login."