Nms Login; Overview; Configuring Nms Login - HP A5830 Series Configuration Manual

NMS login

Overview

The device supports multiple NMS programs.
An NMS is a manager in an SNMP-enabled network which offers a user-friendly interface to facilitate
network management. An NMS runs the SNMP client software.
Agents are programs that reside in the device.
Agents receive and handle requests from the NMS.
•
Agents are managed by the NMS.
•
The NMS and agents exchange information through the SNMP protocol.
By default, you cannot log in to the device through NMS.
To enable NMS login, log in to the device using the console port and make the configuration changes
described in the following table.
Object
Device
NMS

Configuring NMS login

The device supports the following SNMP versions: SNMPv1, SNMPv2c, and SNMPv3. For more
information about SNMP, see Network Management and Monitoring Configuration Guide.
Connect the Ethernet port of the PC to an Ethernet port of VLAN 1 of the device, as shown in
Make sure the PC and VLAN 1 interface can reach each other.
Figure 21 Network diagram for configuring NMS login
Follow these steps to configure SNMPv1 and SNMPv2c settings:
Task...
1. Enter system view.
Requirements
Configure the IP address of the VLAN interface.
Make sure the device and the NMS can reach each other.
Configure SNMP settings.
Configure the NMS. For more information, see your NMS manual.
Command...
system-view
58
Figure
Remarks
—
21.