HP A5830 Series Configuration Manual page 61

# Create VLAN 999, and add interface GigabitEthernet 1/0/1 on the device that connects to the PC to
VLAN 999.
<Sysname> system-view
[Sysname] vlan 999
[Sysname-vlan999] port GigabitEthernet 1/0/1
[Sysname-vlan999] quit
# Configure the IP address of VLAN 999 as 192.168.20.66 and the subnet mask as 255.255.255.0.
[Sysname] interface vlan-interface 999
[Sysname-VLAN-interface999] ip address 192.168.20.66 255.255.255.0
[Sysname-VLAN-interface999] quit
# Create a local user named admin, and set the password to admin for the user. Specify the Telnet
service type for the local user, and set the command level to 3 for this user.
[Sysname] local-user admin
[Sysname-luser-admin] service-type web
[Sysname-luser-admin] authorization-attribute level 3
[Sysname-luser-admin] password simple admin
Configuration on the PC
2.
# On the PC, run the web browser. Enter the IP address of the device in the address bar. The web login
page appears, as shown in Figure 19.
Figure 19 Web login page
# Enter the user name, password, verify code, select English, and click Login. The homepage appears.
After login, configure device settings through the web interface.
54