HP A5830 Series Configuration Manual page 121

Configuration procedure
CAUTION:
Make sure the free Flash space of the device is large enough to store the patch files.
Configure the TFTP server. The configuration varies depending on server type, and the
1.
configuration procedure is omitted.
Enable the TFTP server function.
•
Save the patch files patch_mpu.bin and patch_lpu.bin to the directory of TFTP server.
•
Configure the IRF fabric.
2.
# Before upgrading the software, use the save command to save the current system configuration. (Details
not shown.)
# Load the patch files patch_mpu.bin and patch_lpu.bin from the TFTP server to the root directory of the
master's storage media.
<IRF> tftp 2.2.2.2 get patch_mpu.bin
<IRF> tftp 2.2.2.2 get patch_lpu.bin
# Load the patch files patch_mpu.bin and patch_lpu.bin from the TFTP server to the root directory of the
subordinate's storage media.
<IRF> tftp 2.2.2.2 get patch_mpu.bin slot2#flash:/patch_mpu.bin
<IRF> tftp 2.2.2.2 get patch_lpu.bin slot2#flash:/patch_lpu.bin
# Install the patch.
<IRF> system-view
[IRF] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
114