Displaying And Maintaining The Tftp Client; Tftp Client Configuration Example - HP MSR Series Configuration Manual

Step
5. Download or upload a file.

Displaying and maintaining the TFTP client

Task
Display the source IP address configuration
of the TFTP client.

TFTP client configuration example

Network requirements
Configure the PC in
newest.bin from the PC to the device and upload the configuration file config.cfg from the device to the
PC for backup.
Figure 50 Network diagram
Configuration procedure
This configuration procedure assumes that the PC and the device can reach each other.
1. Configure the PC (TFTP server):
Enable the TFTP server. (Details not shown.)
Configure a TFTP working directory. (Details not shown.)
2. Configure the device (TFTP client):
Command
•
For IPv4:
tftp server-address { get | put |
sget } source-filename
[ destination-filename ]
[ vpn-instance
vpn-instance-name ] [ source
{ interface interface-type
interface-number | ip
source-ip-address } ]
•
For IPv6:
tftp ipv6 tftp-ipv6-server [ -i
interface-type interface-number ]
{ get | put } source-filename
[ destination-filename ]
[ vpn-instance
vpn-instance-name ]
Figure 50 as a TFTP server, and use TFTP to download the system software image file
Command
display tftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
132
Remarks
Optional.
Remarks
Available in any view.