Configuring Optional Common Settings For Console Login - HP A5830 Series Configuration Manual

Figure 10 Configuration page

Configuring optional common settings for console login

CAUTION:
The common settings configured for console login take effect immediately. If you configure the common
settings after you log in through the console port, the current connection may be interrupted. Use another
login method. After you configure common settings for console login, modify the settings on the terminal to
make them consistent with those on the device.
Task...
1. Enter system view.
2. Enable
information.
3. Enter AUX user interface view.
4. Configure
console
properties.
display of copyright
a. Configure
port the baud
rate.
b. Configure
the parity
check
mode.
Command... Remarks
system-view —
Optional.
copyright-info enable
Enabled by default.
user-interface aux
first-number [ last- —
number ]
Optional.
By default, the transmission rate is 9600 bps.
speed speed-value
Transmission rate is the number of bits that the
device transmits to the terminal per second.
parity { even | mark
Optional.
| none | odd |
none by default.
space }
32