Over-Temperature Conditions - Xantrex Freedom HF 1000 Owner's Manual

Inverter/charger
Hide thumbs Also See for Freedom HF 1000:
Table of Contents

Advertisement

Trouble Loads

Over-temperature Conditions

4–10
STATEMENT OF HAZARD
Some equipment may be damaged by the
sine wave output, which has a different wave form than utility-
supplied electricity.
Failure to follow these instructions can damage the unit and/or
damage other equipment.
Some appliances, including the types listed below, may be damaged if
they are connected to the
Speed controllers found in some fans, power tools, kitchen appliances, and
other loads may be damaged.
Some chargers for small rechargeable batteries can be damaged. See
"Precautions for Using Rechargeable Appliances" on page xi
Metal halide arc (HMI) lights can be damaged.
Important:
If you are unsure about operating any device with the
HF, contact the manufacturer of the device to ensure that it is compatible with the
modified sine waveform.
During Inverter mode, when the
to approach its preset shutdown limit, the alarm will beep every two
seconds and the display will show fault code E07. If the over-temperature
condition persists, the alarm will beep once per second and the display
will show fault code E04. The Status LED turns solid RED and the
inverter will shut down to prevent damage to the inverter and protect the
battery from being over-discharged. However, when the internal
temperature drops and falls within normal operating temperature, the
Freedom HF
will recover automatically and will continue inverting.
During AC shore power mode, when the
temperature starts to approach its limit, the charging current will be
reduced to 10A
(Freedom HF
The
Freedom HF
also monitors the internal transfer relay temperature. It
automatically turns on the fan when the relay starts to approach its preset
temperature limit and turns off when it cools down. If the relay exceeds
its preset temperature limit, the display shows a fault code E11. See
reset error codes E10 to E12:" on page
Freedom
Freedom
HF:
Freedom
HF's internal temperature starts
Freedom
1000) or 20A
(Freedom HF
5–7.
HF's modified
for details.
Freedom
HF's charger
1800).
975-0390-01-01
"To

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Freedom hf 1800Freedom hf seriesHf1000Hf1800

Table of Contents