Independent Power System - Xantrex Freedom HF 1000 Owner's Manual

Overload
Alarm and
Shutdown
Over-temp
Alarm and
Shutdown

Independent Power System

Inverting
Charging
975-0390-01-01
During Inverter mode, the
loads that are connected and drawing power from the unit are close to the
maximum operating limit.
The Freedom HF automatically shuts down when the maximum operating
limit is exceeded.
During Inverter mode, the
overheating and approaching the over-temperature shutdown limit.
The Freedom HF automatically shuts down when the limit is exceeded.
Your Freedom HF has been designed to be the heart of a sophisticated,
independent power system. While the
"friendly" product to operate, Xantrex wants to ensure that you get the
best performance from your system.
Freedom HF produces 120 Vac from your 12V batteries and is capable of
starting heavy loads like refrigerators and pumps.
When the Freedom HF
load, it draws less than 1A of current from the battery (or battery bank).
This feature allows the unit to operate without draining too much stored
energy.
For the inverter to perform effectively, the batteries must be charged
correctly. The unit has a built-in three-stage charging system that extends
the life and optimizes the performance of the batteries.
In addition to the numerous features which let you maximize your
battery's life and performance, the
chargers—also has the ability to recharge batteries even if the voltage is
near zero (sometimes called dead battery charging).
Freedom HF automatically alerts you if the
Freedom HF automatically alerts you if it is
Freedom HF
is inverting (producing 120 Vac output) without a
Freedom
Independent Power System
is an extremely
HF—unlike many
1–3