Checking Output Power; Operating Several Loads At Once; Turning The Audible Alarm On Or Off - Xantrex Freedom HF 1000 Owner's Manual

Checking Output Power

Operating Several Loads at Once

Turning the Audible Alarm ON or OFF

4–6
During Inverter mode, you can check how much power (displayed in kW)
the Freedom HF is supplying to the connected loads by pressing the
Select button until the Output Power LED illuminates.
If you are going to operate several loads from the
on one at a time after you have turned the inverter on.
Turning loads on separately helps to ensure that the inverter does not have
to deliver the starting current for all the loads at once, and will help
prevent an overload shutdown.
The Freedom HF's audible alarm can be turned ON or OFF. Any
warnings such as fault conditions or imminent shutdown are both
displayed on the display panel's screen and sounded on the alarm
speakers.
It is not possible to turn OFF the screen and prevent it from displaying
error codes but it is possible to turn OFF the audible alarm.
Note:
The alarm setting will reset to its default setting when the
Freedom HF's Inverter button is turned OFF then turned ON
again.
Freedom HF, turn them
975-0390-01-01