Display Panel Operation - Xantrex Freedom HF 1000 Owner's Manual

Display Panel Operation

3
4
STATUS
Utility
Battery
Fault
Feature Description
1
Inverter button
• Press and hold for one second to turn the
(when AC Shore Power is NOT present.)
• Press and hold for five seconds to go into Charger Current Select Mode.
2
Three-digit LED display screen shows status information and fault codes.
3
Status LED Indicates the mode of operation with a three-color LED.
• Green pertains to Utility status.
• Solid indicates the
• Flashing indicates the
charging the battery.
• Yellow pertains to Battery status.
• Solid indicates the
AC power.
• Flashing indicates the
detected thus transferring to shore power mode within 20 seconds.
• Red indicates a Fault condition and the
"Troubleshooting Reference" on page
4
Select button
• In Inverter mode, press the button to choose what appears in the three-digit LED
display: Input Voltage, Input Current, or Output Power. See
inverter mode setting:" on page
NOTE: A corresponding LED lights up for each of the three items.
• In an Alarm condition, press and hold for two seconds to disable (or enable) the audible
alarm. See
• In Charger Current Select Mode, press to select the charger current. See
charger's charging current setting:" on page
4–2
The Freedom HF features a display panel with three-digit LED display to
show inverter, AC source, and battery status information.
1
Input Voltage (V)
Input Current (A)
Select
Output Power (kW)
Freedom HF
Freedom HF
Freedom HF
Freedom HF
"To adjust the alarm setting:" on page
2
FREEDOM
HF 1000
Freedom HF 1000
Freedom HF's Inverter function ON or OFF
is in shore power mode and battery is fully charged.
is in shore power mode and the unit is currently
is in inverter mode and using the battery to provide
is in inverter mode but AC shore power is
Freedom HF
5–8.
3–5.
3–5.
3–4.
See NOTE in Feature # 4 below.
shown
has shut down. See
"To change the
"To change the
975-0390-01-01