Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured alcohol
3.
and wipe it with a lint free cloth before installation.
The lamp generates UV radiation. Never operate the lamp without appropriate shielding.
4.
5. When ling up, the lamp operates at high pressure and there is a slight risk of arc tube rupture. The
risk increases with age, temperature and improper handling of the lamp. Do not use the lamp longer
than its lifespan.
6. Make sure the lamp is located in the center of the reflector for the best projection.
4.2 Change The Lamp
Loosen the screw at the rear side of the fixture and open the lamp compartment cover.
7
A