Table of Contents
Advertisement
Exchange Lamp
3
In case of replacement of the lamp, do not open the lamp accessory door
within 15 minutes until the unit cools down after switching off.
LAMP: EFP 12V 100W
1. Always switch off the main supply and never handle the lamp or luminaries when is hot.
2. Do not touch the bulb with bare hands. If this happens, clean the lamp with denatured
alcohol and wipe it with a lint free cloth before installation.
3. Never operate the lamp without appropriate shielding.
4. Make sure the lamp is located in the center for the best spot.
DANGER!
1. Unscrew the screw from the lamp accessory door
2. Remove the cover
8A
Advertisement
Table of Contents
