MENU
UP
DOWN
ENTER
4. DMX input/output: For DMX 512 operation, use 3/5-pin XLR plug cable to link the units together
5. Power In: Used to connect to supply power.
6. Power out: Used to connect to next unit.
7. Fuse (T 5A): Protect the unit from damage of over current.
4. Gobo and Lamp
4.1 Gobos
CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be
opened!
To enter into move backward or leave the menu
To go backward to move up in the menu
To go to move down in the menu
To perform the desired functions
Install the gobos with the device switched off only.
Unplug from mains before changing gobos!
DANGER!
6A