Technical Specification; Lamp - ACME MH-575S User Manual

moisture.
l Never touch bulb with bare fingers, as it is very hot after using.
l Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.
l Do not start on the unit without bulb enclosure or when housing is damaged.
l The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.
l Do not look directly at the light while the bulb is on.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs by yourself. In the unlikely event your unit may require service, please contact your
nearest dealer.
Installation
The unit should be mounted via its screw holes on the bracket (please refer to the drawing
below). Always ensure that the unit is firmly fixed to avoid vibration and slipping while
operating. Always ensure that the structure to which you are attaching the unit is secure and
is able to support a weight of 10 times of the unit's weight. Also always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
of the touch of people and has no one pass by or under it.

2. Technical Specification

Power supply
- AC 120V~60Hz or AC 230/240/250V~50/60Hz
4-

Lamp

- NSD 575/2, MSD 575/2
Optical system
- High efficiency optical system
- High quality optical lens and dichroic colors
- Beam angle: 13°
Shutter/Dimmer
- Blackout, 0~100 smooth dimming and strobe speed variable(1~10 flashes per
second).
Color wheel
- Independent color wheel with 9 trapezoid dichroic colors plus white.
- Color wheel rotates with variable speed, giving rainbow effect.
Gobo wheel
- Independent gobo wheel with 7 rotating, interchangeable gobos plus open
- Gobo wheel rotates with variable speed, giving shaking effect.
Effect Wheel
- Prism/Rotating Prism
Movement
- Pan: 540° in 2.8 second.
- Tilt: 270° in 1.6 second.
DMX Channels
- Standard DMX 512 signal addressing and can be controlled by any universal DMX
controller.
13 Channels:
Channel 1 = Pan
Channel 2 = Pan 16Bit
Channel 3 = Tilt
Channel 4 = Tilt 16Bit
Channel 5 = Pan/Tilt Speed
Channel 6 = Dimmer
Channel 7 = Strobe/Shaking
Channel 8 = Color
Channel 9 = Gobo
Channel 10 = Gobo Rotation
Channel 11 = Prism
Channel 12 = Focus
Channel 13 = Functions
5-