Troubleshooting - ACME XP-1000WZ User Manual

070 – 090
091 – 110
111 – 131
132 – 152
153 – 172
173 – 193
194 – 213
214 – 234
235 – 255
18
0 – 255
20 – 49
19
50 – 200
201 – 210
211 – 255
20
0 – 255
21
0 – 255

7. Troubleshooting

Following are a few common problems that may occur during operation. Here are some suggestions
for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
3. Check the power on LED to see if it can be light up or not.
B. Not responding to DMX controller
1. DMX LED should be on. If not, check DMX connectors, cables to see if they are linked properly.
2. If the DMX LED is on and no response to the channel, check the address settings and DMX
polarity.
3. If you have intermittent DMX signal problems, check the pins on connectors or on PCB of the unit
or the previous one.
4. Try to use another DMX controller.
A
Color Macro 4
Color Macro 5
Color Macro 6
Color Macro 7
Color Macro 8
Color Macro 9
Color Macro 10
Color Macro 11
Color Macro 12
ZOOM:
Wide  narrow
STROBE:
0 – 19 Shutter closed, lamp switches to low power
Shutter Open
Strobe, slow  fast
Shutter Open
Random strobe
DIMMER:
Closed (0% )  Open (100%)
DIMMER FINE
Closed (0% )  Open (100%)
30