How To Set The Unit; Main Function - ACME XP-1000WZ User Manual

Remove the old lamp and turn the lamp left in order to take the lamp out, put a new lamp that
must be the same type as the old one. And then place the new lamp into the lamp holder and turn
the lamp right in order to fix. Finally reinstall the lamp compartment cover, fastening it securely
before turning on power.

5. How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the
required function is shown on the monitor. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return
to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.
In the event of disconnecting with mains power, press the UP button for one minute to enter into
menu mode. Press MENU button or let the unit idle one minute to exit.
The main functions are shown below:
A
8