ACME XP-1000WZ User Manual page 12

16 Channel, 21 Channel or 21 Channel mode, press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Connect To
To select Connect To, press the ENTER button to confirm. Use the UP/DOWN button to select
Auto, DMX, Ethernet or Wireless DMX, press the ENTER button to store. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Device ID
To select Device ID, press the ENTER button to confirm. Use the UP/DOWN button to select Auto
or Manual, press the ENTER button to store. Press the MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
IP Address
To select IP Address, press the ENTER button to confirm and the display will show the current IP
Address of the unit. To go back to the functions press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu mode.
Art-net Setting
To select Art-net Setting, press the ENTER button to confirm. Use the UP/DOWN button to select
Universe or Net, press the ENTER button to store. Press the MENU button back to the last menu
or let the unit idle one minute to exit menu mode.
DMX Retransmit
To select DMX Retransmit, press the ENTER button to confirm. Use the UP/DOWN button to
select No (normal) or Yes (DMX Retransmit), press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
View DMX Value
To select View DMX Value, press the ENTER button to confirm. Use the UP/DOWN button to view
the DMX channel value. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Wireless DMX Reset
To select Wireless DMX Reset, press the ENTER button to confirm. Use the UP/DOWN button to
select No (normal) or Yes (Wireless DMX Reset), press the ENTER button to store. Press the MENU
A
11