Check Ap332I Led Activity - Meru Networks AP332 Installation Manual

Check AP332i LED Activity

Check AP332i LED Activity
When AP332i first connects to the controller (and any time the access point is rebooted), the AP initial-
izes and then is programmed by the controller. When the AP first powers up, the LED is green. There-
after, its color indicates its operating status.
Figure 21: AP332i Status LED
LEDs
Status
After the AP332i is connected, check the status of the LED. Its indicator state is described below.
30 Meru Access Point Installation Guide © 2012 Meru Networks, Inc.